zpd2.7 ... zpd75 (500 mw) zpd2.7 ... zpd75 (500 mw) silicon planar zener diodes silizium-planar-zener-dioden version 201 3 -0 4 - 23 dimensions - ma?e [mm] maximum power dissipation maximale verlustleistung 500 mw nominal z-voltage nominale z-spannung 2.7...75 v glass case glasgeh?use ~ do-35 ~ (sod-27) weight approx. gewicht ca. 0.13 g equivalent smd-version ?quivalente smd-ausfhrung zmm1 ... zmm75 standard packaging taped in ammo pack standard lieferform gegurtet in ammo-pack standard zener voltage tolerance is graded to the international e 24 (~ 5%) standard. other voltage tolerances and higher zener voltages on request. die toleranz der zener-spannung ist in der standard-ausfhrung gestuft nach der internationalen reihe e 24 (~ 5%). andere toleranzen oder h?here arbeitsspannungen auf anfrage. maximum ratings and characteristics grenz- und kennwerte zpd-series power dissipation verlustleistung t a = 25c p tot 500 mw 1 ) operating junction temperature C sperrschichttemperatur storage temperature C lagerungstemperatur t j t s -50...+175c -50...+175c thermal resistance junction to ambient air w?rme widerstand sperrschicht C umgebende luft r tha < 300 k/w 1 ) thermal resistance junction to lead w?rme widerstand sperrschicht C anschlussdraht r thl < 240 k/w zener voltages see table on next page C zener-spannungen siehe tabelle auf der n?chsten seite 2 3 1 valid, if leads are kept at ambient temperatere at a distance of 10 mm from case gltig, wenn die anschlussdr?hte in 10 mm abstand vom geh?use auf umgebungstemperatur gehalten werden 2 tested with pulses C gemessen mit impulsen 3 the zpd1 is a diode operated in forward. hence, the index of all parameters should be f instead of z. the cathode, indicated by a band, has to be connected to the negative pole. die zpd1 ist eine in durchlass betriebene si-diode. daher ist bei allen kenn- und grenzwerten der index f anstatt z zu setzten. die mit einem balken gekennzeichnete kathode ist mit dem minuspol zu verbinden. ? diotec semiconductor ag http://www.diotec.com/ 1 ? 1.9 0.1 ? max 0.5 6 2 . 5 3 3 . 9 0 . 4
zpd2.7 ... zpd75 (500 mw) maximum ratings grenzwerte type typ zener voltage 2 ) zener-spannung 2 ) i z = 5 ma dynamic resistance diff. widerstand r zj [] at f = 1 khz temp. coeffic. of z-voltage der z-spannung reverse volt. sperrspanng. i r = 100 na z-current 1 ) z-strom 1 ) t a = 25c v zmin [v] v zmax [v] i z = 5 ma i z = 1 ma vz [10 -4 /c] v r [v] i zmax [ma] zpd2.7 2.5 2.9 75 (< 83) < 500 C9C4 C 172 zpd3.0 2.8 3.2 80 (< 95) < 500 C9C3 C 156 zpd3.3 3.1 3.5 80 (< 95) < 500 C8C3 C 143 zpd3.6 3.4 3.8 80 (< 95) < 500 C8C3 C 132 zpd3.9 3.7 4.1 80 (< 95) < 500 C7C3 C 122 zpd4.3 4.0 4.6 70 (< 85) < 500 C6C1 C 109 zpd4.7 4.4 5.0 60 (< 78) < 500 C5+2 C 100 zpd5.1 4.8 5.4 30 (< 60) < 480 C3+4 > 0.8 93 zpd5.6 5.2 6.0 10 (< 40) < 400 C2+6 > 1 83 zpd6.2 5.8 6.6 5 (< 10) < 200 C1+7 > 2 76 zpd6.8 6.4 7.2 4.5 (< 8) < 150 +2+7 > 3 69 zpd7.5 7.0 7.9 4 (< 7) < 50 +3+7 > 5 63 zpd8.2 7.7 8.7 4.5 (< 7) < 50 +4+7 > 6 57 zpd9.1 8.5 9.6 5 (< 10) < 50 +5+8 > 7 52 zpd10 9.4 10.6 5.2 (< 15) < 70 +5+8 > 7.5 47 zpd11 10.4 11.6 6 (< 20) < 70 +5+9 > 8.5 43 zpd12 11.4 12.7 7 (< 20) < 90 +6+9 > 9 39 zpd13 12.4 14.1 9 (< 25) < 110 +7+9 > 10 35 zpd15 13.8 15.6 11 (< 30) < 110 +7+9 > 11 32 zpd16 15.3 17.1 13 (< 40) < 170 +8+9.5 > 12 29 zpd18 16.8 19.1 18 (< 50) < 170 +8+9.5 > 14 26 zpd20 18.8 21.2 20 (< 50) < 220 +8+10 > 15 24 zpd22 20.8 23.3 25 (< 55) < 220 +8+10 > 17 21 zpd24 22.8 25.6 28 (< 70) < 220 +8+10 > 18 20 zpd27 25.1 28.9 30 (< 80) < 250 +8+10 > 20 17 zpd30 28 32 35 (< 80) < 250 +8+10 > 22 16 zpd33 31 35 40 (< 80) < 250 +8+10 > 24 14 zpd36 34 38 40 (< 90) < 250 +8+10 > 26 13 zpd39 37 41 50 (< 90) < 300 +10+12 > 28 12 zpd43 40 46 60 (< 100) < 500 +10+12 > 30 11 zpd47 44 50 70 (< 110) < 700 +10+12 > 33 10 zpd51 48 54 80 (< 125) < 700 +10+12 > 36 9 zpd56 52 60 90 (< 135) < 750 +10+12 > 39 8 zpd62 58 66 100 (< 150) < 800 +10+12 > 44 8 zpd68 64 72 110 (< 200) < 850 +10+12 > 48 7 zpd75 70 79 120 (< 250) < 900 +10+12 > 52 6 1 notes see previous page C fu?noten siehe vorhergehende seite 2 http://www.diotec.com/ ? diotec semiconductor ag
zpd2.7 ... zpd75 (500 mw) ? diotec semiconductor ag http://www.diotec.com/ 3 0 2 3 4 5 6 7 8 10 [v] v z [ma] 50 150 0 100 i z typical breakdown characteristic typische abbruchspannung C tested with pulses C gemessen mit impulsen 5,6 6,2 6,8 7,5 8,2 9,1 i zmax t = 25c j i = 5 ma z 2.7 3.3 3.8 4.7 120 100 80 60 40 20 0 [% ] i fav rated forward current versus ambient temperature ) zul. richtstrom in abh. von der umgebungstemp. ) 1 1 [c] t a 150 100 50 0 1 10 10 10 1 3 2 [p f] [v] c j v z t = 25c f = 1.0 mhz j v = 1v r v = 2v r junction capacitance vs. zener voltage (typical) sperrschichtkapazit?t in abh. v.d. zenerspg. (typ.) v = 2v r v = 1v r 10 100 0 10 20 30 40 50 60 70 80 v z 18 24 30 36 43 51 62 56 68 75 t = 25c j 60 50 45 40 35 30 25 20 15 5 0 [ma] i z i zmax typical breakdown characteristic typische abbruchspannung C tested with pulses C gemessen mit impulsen 10 10 1 10 3 -1 10 10 2 [ma] i f forward characteristics (typical values) durchlasskennlinien (typische werte) 0 v f 0.4 0.6 0.8 1.0 [v] 1.4 t = 100c j t = 25c j
|